10th Gen Corolla XRS Turbo Kit

[blackpearl]

hey x...when u get ur new XRS, here's a turbo kit for $1,100 by Speed Daddy:

http://cgi.ebay.com/ebaymotors/2009-...item2a02aed20b



TOYOTA 2AZ-FE (2009-10) Corolla XRS

21 PIECES TURBO KIT

Speed and power are the goals of most performance tuners when working on their project cars. Many have turned to turbo kits, since turbocharging a car is the most cost effective way to dramatically increase the horsepower and torque of any engine. The turbo system works by utilizing the exhaust gases to spin a turbine, in which the compressor wheel sucks in and forces atmospheric air into the air intake of the engine. More air into the engine means more fuel will be needed. More air and more fuel equal more power.

KITS INCLUDE BUT NOT LIMITED TO :( AS SHOWN FROM PICTURE ABOVE )

T3/T4 (T04E) Turbo Charger Capable of producing 450+ HP
T3 Flange to Manifold
Trim Compressor: 57
Trim Turbine: 76
A/R turbine: 0.63
A/R compressor: 0.50
NPT oil inlet: 1/8
35/38" external wastegate flange
5 Bolt Downpipe exhaust flange
3" Inlet Diameter

Front Mount Turbo Intercooler

• High Quality Aluminum Material
• lightweight Design
• core size: 21.25 x 5 x 2.5
• full size: 27 x 5 x 2.5
• (2) 2 inch inlet and (1) 2.25 inch outlet
• 150 to 130 high temperature reduction

Intercooler Piping kit Made of Aluminum Material lightweight Design

• 2.5 inch piping kit
• x16 T-Clamps
• x8 Silicone Hoses
• x2 90 Degree pipe
• x2 60 Degree pipe
• x2 45 Degree pipe
• x2 Straight pipe
• Might required to cut or modify to fit

2AZ-FE Turbo Manifold

• Made of high quality cast iron material
• allows keep power steering and air conditioning
• fits t3 turbo flange

35/38mm wastegate flange

• direct Bolt-on design
• 38mm V-Band wastegate
• Made of of high quality billet aluminum
• utilized 35/38mm flange
• v-band style, easy to installation
• direct bolt-on design
• neccessary hardware included

Voltage Stabilizer High performance, JDM Style

• Ignition flow to Strengthen Starting Power
• Improves Fuel Efficiency
• Saves Battery Power, and Better performance

Blow-off Valve Aluminum body and cover polished

• Performance produces aggressive Sound,
• Protects turbo by venting compression surge
• Direct bolt-on Design
• includeds complete install kit

Bov Flange Pipe

• Durable, made of high quality Cast material!
• Perfect for the BOV!
• Perfect fitting

Boost Controller

• CNC Machined designed
• aluminum anodized finish
• manual boost control 0-30 psi

Oil Catch Tank

• aluminum body polish and cover
• preserves engine oil,ensure better oil efficiency
• Performance design, safe engine life

Turbo Timer

• ensure proper time to cool down the turbo charged cars
• auto mode feature create a hassle free operation
• bright LED Digitlal display
• automatic idling feature, display battery voltage

Fuel Pressure Regulator

• High quality fitting!
• aluminum lightweight design, long lasting
• performance engines for reliable operation
• can boost 15-75 psi or more

Oil Cooler & line kit

• aluminum material oil cooler
• Stainless Steel line kits
• CNC machined design aluminum oil plate
• lightweight design, sustain over 200psi
• resist high temp. in engine bay
• 1.5mm threads oil filter adapter
• 37",47",62" oil cooler line 7/8" outside diameter hoses

Electric Slim Fan

• Used to Cool Down the Oil Cooler,
• Transmission Cooler, Intercooler,
• A/C System. Radiator
• Able Reverse to Push or Pull air
• blade: 10" x 10"x 1.5"
• 1720 cfm /ea., 12v, 80w
• mounting kit included

Tachometer

• High performance 5 inch tachometer gauge
• 12v power sources required read up to 11,000 RPM
• Beatiful Huge display, increases racing look and style
• included 11k RPM tach, shift light
• Oil Pressure, Oil temp. Water temp.
• sensor and mounting kit included

52mm JDM Smoke LED Gauge *3

• 2 inch Smoke tint lens
• JDM style Super white LED display
• easily to check measurement
• air/fuel ratio, vacuum, turbo boost meter included

Oil Feed Line

• stainless steel material
• 36 inch Stainless Steel material
• 1/8 NPT adaptor goes with the block
• 4AN fitting with on flange
• Necessary fitting for complete installation

Flexible Transfer Hose

• made of 300 stainless steel line
• bend or cut to any configuration and desired length
• flex, high gloss powder coated design
• aids in cooling and withstands vibration and corrosion
• ideal for radiator or engine swaps, parts included:
• x1 24 inch flex hose
• x2 3 inch connector
• x2 1/8 inch
• x2 1/2 inch
• x4 hose clamp

Braided Hose Kits

• braided lightweight design steel material
• lowest price to clean up the engine bay
• able to dress up radiator hoese, fuel lines,
• heater hoses, vacuum lines and more

APPLICATION : ( 2AZ-FE 2.4L L4 ENGINE )

TOYOTA CAMRY 2002 2003 2004 2005 2006 2007 2008 2009

TOYOTA SOLARA 2003 2004 2005 2006 2007 2008 2009

TOYOTA COROLLA XRS 2009 2010

TOYOTA MATRIX XRS 2009 2010

TOYOTA SCION TC 2005 2006 2007 2008 2009

TOYOTA SCION XB 2008 2009

TOYOTA RAV 4 2006 2007 2008

TOYOTA HIGHLANDER 2001 2002 2003

~ALSO FIT~

PONTIAC VIBE 2009 2010

*Professional Installation is Highly Recommended (No Instructions Included)!!*

[BriaN]

the wastegate placement on the manifold looks like its gonna be a problem

[blackpearl]

is that a fatal problem? kit no good?

[Rinconrolla98]

WOW ... thats a nice deal

[KiLaTeS]

yes it is, also... pearl i saw one 10th gen with the same kit sometime ago here in TMT with a kit with that westgate there and looks just fine i dont thiunk there is any problem with it at all... i dont know if you know wish car im talking about...

[blackpearl]

yep...i remember, it was andy somethin....he never let us know if it was finished or not?

[BriaN]

Originally Posted by KiLaTeS

yes it is, also... pearl i saw one 10th gen with the same kit sometime ago here in TMT with a kit with that westgate there and looks just fine i dont thiunk there is any problem with it at all... i dont know if you know wish car im talking about...

ur talkin about andy he had a different one doesnt look like that manifold

he has the turbonetics manifold nowdunno how closely matched the ebay one is

[CRSIE03]

nice but it still looks like your missing 2k worth of parts.

[KiLaTeS]

yeah,,, that one... i tought it was the same...

[blackpearl]

this speed daddy kit might be a good starter kit, for th money (unless parts are missing)?...plus, its for 2.4 L not a 1.8 L, so it should get u up over 200 hp easily, if its capable of producing 450+

[-X-]

theres no engine management pictured or listed.

[caveman]

That manifold seems to hold well with power, you can find those for about $100 or so on ebay. No wastegate problems.

Pipes on kits like these are almost, if not 100% of time not the right fit.
Which is why it even says "Might required to cut or modify to fit"

Just going by statistics, I want to say you are going to need to push somewhere between 15-20psi on a standalone or great piggyback tune to get into the 400s. But if the couplers and other parts hold about 2-300whp is capable.

Like mentioned before by -X-....no engine management nor injectors included, unless I skipped that part.


Dont mean to make it sound like Im bashing, just presenting facts and experiences Ive had or read....

[blackpearl]

what would recommend for injectors and engine mgmt to go w/ this kit?

[caveman]

Originally Posted by blackpearl

what would recommend for injectors and engine mgmt to go w/ this kit?

My suggestion would be...if you were wanting to make simple power then go with either AEM FiC or Greddy Emanage Ultimate. The AEM standalone is proving itself well with making big power on the 2AZ's as well.

For injectors, size depends on power goals.
550cc should be good anywhere from 250-300whp

As far as brands, there are RC Engineering, and Deatchwerks (sp) are popular.

[blackpearl]

thanks...that info might come in handy one of these days...do you sell any of those items?